Daily Quest · 2026-10-05
Finish the wiring · difficulty 2 of 3
The kettle's ready-tone buzzer sits on the shelf with a bare-legged piezo next to a loose jumper. That's because last shift you yanked its wire to fix something in your bunk, and never gave it back. The code still lives on the board, so you just need to lay the buzzer out and hook it up again so the galley chirps when the water's hot.
Solve it in the free browser circuit simulator: no kit and no install needed. A new challenge every day at craftingtable.com/daily-quest; past days are in the archive.