Daily Quest · 2026-08-11
Finish the wiring · difficulty 3 of 3
You just yanked the sticky slide switch off your tool locker lamp and dropped in a nicer one from the spares bin. Trouble is, the new switch, the LED, and the board are all sitting loose on the bench, not connected to anything. The code's already loaded and correct, so this is pure wiring — lay it out and hook it up before your break's over.
Solve it in the free browser circuit simulator: no kit and no install needed. A new challenge every day at craftingtable.com/daily-quest; past days are in the archive.