Daily Quest · 2026-10-07
Finish the wiring · difficulty 3 of 3
The little air-quality readout for your cabin died last week, so you pulled the good OLED and the salvaged board from a scrapped unit and lined them up on the bench. Everything's there — screen, board, jumpers — just nothing joined up yet. The code's already loaded and correct, so this is a wiring job: hook the panel to the board and let it print the air line again.
Solve it in the free browser circuit simulator: no kit and no install needed. A new challenge every day at craftingtable.com/daily-quest; past days are in the archive.